The Plug6 Plus w/Power Module - USB Dynamo Charger
439.97

The Plug6 Plus w/Power Module - USB Dynamo Charger

Perennial Cycle Loves Dynamo!

The Plug6 Plus is the newest iteration of a fully integrated power system by ToutTerrain - designed as an all-in-one solution for dynamo charging for both long distance riders and commuters alike.

The Plug6 is an eco-friendly solution for charging your electronics. Not only will you get reliable power at the integrated USB-C Port, you will have that consistant power even under difficult charging conditions, such as with the lower temperatures here in MN. Even more, it seamlessly integrates into your bike, replacing your top cap with a super functional, yet clean, USB-C charging port.

It is that fantasticly simple!

Click for Plug 5 Plus Manual HERE

FEATURES
FITS: 1-1/8" Steer Tubes (requires inside diameter 23.6mm or larger to a depth of at least 6" to accept the power module, plus some room underneath for the wire connections)
BATTERY: 1100mAh LiFePo
WEIGHT: 195g (Including all hardware)
USB OUTPUT: USB Type-C Connector
POWER SOURCE: 6 Volt, 3 Watt Dynamo Hub


Relevant Dynamo Blog Posts: Dynamo Lighting or Charging Devices w/Dynamo Power
$439.97
- +
Availability:In stock
SKU TTR-1002
Details
Cinq Plug6 Plus with Power Module
Cinq 6, Tout Terrain
TOU0620004012

Will this work with a carbon steerer tube?
The insertable portion of the power module and expander clamp has an outside diameter of ~23.5mm to ~24.0mm, requiring the inside diameter of your fork's steerer tube to be at least slightly *larger* than 24.0mm. We have found that most carbon steerer tubes seem to have a compatible ID, but we recommend you measure carefully. Additionally, the incoming power wire connections need to take place *inside* of the steerer tube beneath the power module. The steerer tube on most carbon forks does not have an open bottom at the fork crown the way steel or aluminum forks typically do. Some carbon steerer tubes open into the fork blades through the crown area and you might be able to get wiring inside the fork through a braze-on or drain hole.

Will this work with a very short steerer tube or tapered steerer tube?
The insertable length of the Power Module is 150mm. You need a usable (24.0mm or larger) diameter to a depth of at least 150mm. (The wires coming out the bottom will need some additional space below the 150mm depth for making connections, but the diameter is not critical.) Tapered steerer tubes are not a problem because the expander clamp exists entirely within the top 20mm.

Can I use this with or without a headlight?
Yes; either way! If there is no headlight, connect the dynamo power to the wires with red and black heat shrink, and insulate the green terminals with electrical tape. (Do not connect the green terminals to one another!) If there is a headlight, connect as described previously, and connect the headlight to the two green terminals. This allows the Plug6 Plus to be able to detect when the headlight is turned on. The included power cable is about 3 feet long and has a nice round outer jacket with an outside diameter of about 4mm. One end is pre-terminated to plug into the Power Module (and your headlight optionally) and the other end has a plain cut end. The kit includes one male and one female 2.8mm spade to install on your headlight power wire to allow it to plug into the wiring harness.
More Information
More Information
Brand Tout Terrain
Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

You may also be interested in