SON Junction Box, SON w/Hub Adapter & SON Connectors

These connectors by SON are a clean way to split cables adding zero bulk to your wiring as well as adding a "Y" junction box to add another device (like the Sinewave Revolution).

These are the 3 products to choose from:

- SON Hub Adapter Plug + (SON Connector): A very professional way to connect your hub to a split-able connector. The Adaptor Plug stays connected to your hub (always) and you have the ability to split the Connectors when you need to remove your wheel.

- SON Junction Box w/Hub Adapter + (1 soldered coax connector & 1 coax connector): This unit has a SON Connector soldered to the Hub Adapter and after an 8" length of coaxial cable there's a "Y" Junction Box that allows the front light wire to be soldered into the box and the male connector feeding into the junction box could be soldered to a wire running to your USB device.

- SON Junction Box + (1 SON Connector): The junction box has a coaxial cable and one SON Connector wired into it. Potentially the coaxial cable could run to a hub that needs bare cables to connect it to the hub, the wire from your front light could solder into the junction box and the male connector feeding into the junction box could be soldered to a wire running to your USB device.

Check out the SON Connector instructions HERE
Check out the SON Junction Box instructions HERE

Relevant Dynamo Blog Posts: Dynamo Lighting or Charging Devices w/Dynamo Power